KMK NEWSLETTER

NOVEMBER 2026

SMALL CHECKS, BIG BENEFITS

November is a time to appreciate the things that make our lives a little easier. For many bowling centers, a walking lane machine is certainly one of those things. While the machine takes care of cleaning and conditioning the lanes, operators can focus on other important responsibilities. Whether it is cleaning approaches, performing maintenance on pinsetting equipment, or handling other daily tasks, a walking lane machine provides valuable time to get more done.

To get the most out of your walking lane machine, regular maintenance is essential. Taking a few minutes each week to inspect the walking system, preferably during a slower period, can help identify potential issues before they become problems.

Before making any adjustments to the walking settings in the software, it is important to inspect the hardware first:

·       Check the set screws on all drive wheels and chain sprockets.

·       Check the chain tension for the drive wheels.

·       Inspect the gaps on the Approach Drive Wheel proximity sensors.

·       The drive motors can build up carbon dust from the brushes. Remove the brushes, inspect them, and then blow the dust out of the motors.

·       Balance the drive motors.

·       Inspect the gutter transition ramps. Bad transitions can cause the machine to come off the lane crooked.

After completing these checks, you can move on to the approach walking settings in your machine's software to make any necessary adjustments. Since procedures may vary depending on the machine model and software version, refer to your machine's manual for detailed instructions on fine-tuning the walking system. Kegel's online manuals are available at www.kegel.net/machine-manuals.

Before changing any settings, consider writing down the current values or taking a quick photo with your phone. Having a record of the original settings makes it much easier to return to them if an adjustment does not produce the desired result.

While inspecting the walking system, take the opportunity to check the whiskers and bumper switches as well. Ensuring these components are properly adjusted helps maintain reliable operation and reduces the risk of unnecessary machine damage. Instructions for both adjustments can be found in the Drive System section of your machine's manual.

A little preventive maintenance can make a big difference in the long-term performance of your walking lane machine. By setting aside a few minutes each week to keep the walking system in good condition, you can help ensure dependable operation for years to come. That is certainly something to be thankful for!


What’s new on kmk

Flow Charts

7 PIN ADS ERROR

10 PIN ADS ERROR

REVERSE TRAVEL ERROR AT THE FOUL LINE

CUSHION ROLLER WILL NOT RAISE EVENLY

 

more tips, videos, and troubleshooting

Using the interactive flowcharts  

Have you seen how awesome these are? Check them out!

Calling all mechanics Submit your tips and tricks!

Have a suggestion for a great tip or trick to be added to our website? We welcome suggestions as we grow the information on this site. Submit your ideas below!